The new BMW 6-Series Convertible is available with two engine variants from launch. The eight-cylinder powerplant in the BMW 650i Convertible produces 300 kW/407 hp, while an exclusive variant of the six-cylinder in-line engine with BMW TwinPower Turbo, direct injection and VALVETRONIC -generating 235 kW/320 hp – has been developed for the BMW 640i Convertible. Both engines team up as standard with an eight-speed Sports automatic gearbox. Standard-fitted BMW EfficientDynamics features include the Auto Start-Stop function in the BMW 640i Convertible.

At 4,894 millimetres (192.6 in.) in length, the new BMW 6-Series Convertible is 74 millimetres (2.9 in.) longer than its predecessor. Its similarly extended wheelbase now stretches to 2,855 millimetres (112.4 in.). The car has also grown by 39 millimetres (1.5 in.) in width, and now measures 1,894 millimetres (74.5 in.) across, while 9 millimetres (0.35 in.) have been shaved off its height (now 1,365 mm / 53.7 in.). These dimensions not only create a significantly more powerful and, at the same time, elegantly sweeping overall impression, they also take interior spaciousness to new levels. Despite its lower height, the new BMW 6-Series Convertible offers greater headroom in both the front and the rear. Added to which, the height adjustment of the driver and front passenger seats cover a greater range. The increase in the width of the interior is noticeable from all four seats, and passengers in the rear seats also benefit from additional legroom. The tilt angle of the rear seat backrest has seen further optimisation over the predecessor model and now achieves virtually the same angle as you will find in BMW saloons.

The 4.4-litre eight-cylinder engine in the new BMW 650i Convertible develops a maximum 300 kW/407 hp between 5,500 and 6,400 rpm, and puts its peak torque of 600 Newton metres (443 lb-ft) on tap between 1,750 and 4,500 rpm. This unique engine, whose turbochargers are positioned in the V-shaped area between the cylinder banks, produces an instantaneous and sustained wave of power, making it a feast for the enthusiast driver. The new BMW 650i Convertible completes the sprint from 0 to 100 km/h (62 mph) in 5.0 seconds, and the engine electronics eventually step in to halt acceleration at 250 km/h (155 mph). This range-topping engine also boasts extraordinary efficiency for a model in its output class, as average fuel consumption of 10.7 litres per 100 kilometres in the EU test cycle (26.4 mpg imp) and CO2 emissions of 249 grams per kilometre clearly show.

The six-cylinder in-line engine under the bonnet of the new BMW 640i Convertible complements its BMW TwinPower Turbo technology and petrol direct injection with VALVETRONIC fully variable valve control. All of which enables the 3.0-litre unit to develop a maximum 235 kW/320 hp at 5,800 rpm and maximum torque of 450 Newton metres (332 lb-ft) between 1,300 and 4,500 rpm. This engine propels the BMW 640i Convertible from 0 to 100 km/h (62 mph) in 5.7 seconds and on to an electronically limited top speed of 250 km/h (155 mph). Its average fuel economy in the EU test cycle comes in at 7.9 litres per 100 kilometres (35.8 mpg imp), while CO2 emissions are 185 grams per kilometre.

The 2011 Chrysler 200 Convertible is offered with the available new 3.6-liter Pentastar V-6 engine which provides an exhilarating driving experience that offers customers the best of both worlds – outstanding V-6 horsepower and exceptional fuel economy. The Chrysler 200 Convertible is also available with the proven 2.4-liter I4 World Gas Engine. Both engines are mated to a six-speed transmission.

The 2011 Chrysler 200 Convertible will be available in three different configurations in the United States – the Chrysler 200 Convertible Touring model, 200 Convertible Limited model and the 200 Convertible S (late availability) model. All are packed with style, safety, innovative features and a dynamic, open-air driving experience at a surprising value.

The first all-new Lotus since the iconic Elise made its debut in 1995, The Evora enters the sports car market as currently the world’s only mid-engined 2+2. Powered by a Lotus-tuned 3.5-litre V6 engine producing 280 PS, and weighing just 1350 kg (prototype specification), the Evora promises breathtaking performance. During preliminary testing around the famous Nürburgring, the Lotus chassis engineers report that it is extremely agile and great fun to drive – even when clad with the full development disguise that hid the beautiful lines from the prying motor-industry paparazzi.

In addition to its excellent performance and exemplary handling, the Evora offers a more refined ownership experience than Lotus’s existing smaller four-cylinder models. Its elegantly styled cabin is elegantly trimmed and its equipment list includes contemporary features such as an advanced touch-screen multi-media system and electric power-fold door mirrors.

Because one of the roles of the Evora is to attract new customers to the Lotus brand, much attention has been paid to its ease of use. Wider, taller door apertures and narrower sills make getting in and out of the cabin a less athletic undertaking than it is in Lotus’s smaller sports cars (the Elise, Exige, Europa and 2-Eleven), while the design of the cabin itself will accommodate two 99th percentile (6ft 5in tall) American males in the front seats.

The ‘convenience factor’ of the Evora extends to less obvious areas of the car. For instance, beneath the skin the entire front-end structure is a high tech aluminium sacrificial modular unit, attached to the main extruded aluminium tub. This modular unit is designed to deform for maximum safety, and to reduce repair costs in the event of a frontal impact.

The Evora has been designed with global automotive regulations in mind, and future derivatives are planed, these including amongst others, a convertible.

The Evora will be hand crafted and built on a dedicated new assembly line within Lotus’s advanced manufacturing facility at Hethel in the east of England; capacity limitations will restrict production to approximately 2000 cars a year, ensuring the dynamic new sports car’s rarity and exclusivity.

Kia Soulster open-air concept, a variation of the highly anticipated Soul, arriving at Kia Motors retailers this spring. With young buyers’ budgets in mind, the Kia Soulster is an efficient front-drive car based on the production model Kia Soul, recently introduced at the 2008 Los Angeles Auto Show.

A two-door concept with roadster roots, the brightly colored Soul’r yellow Soulster projects a hip industrial look with screw borders, reminiscent of a rivet design found on a fighter jet. The windshield is shortened for a sportier and hunkered down appearance. A two-piece top enables passengers to expose the front and back seating areas independently, using elbow-grease technology. The roll bar serves a dual purpose and includes a place for the slider tracks, while providing protection not found in traditional convertibles.

With a unique face, Kia Soulster has a tough but refined character. The toughness is expressed through details like the anodized skid-pad insert, which matches the fender vents, roll bar header and wheels.

Kia Soulster’s attitude incorporates lighting that shines through with an amber glow under the headlamps. The side vents, side-mirror turn signals, unique LED headlamps, fog and tail lamps incorporate blue shades.

The energetic, distinctive look carries from front to rear with dual chrome exhaust and polished aluminum exhaust tips featuring carbon-fiber interior sleeves. The large 19-inch, five-spoke aluminum alloy wheels perfect the Kia Soulster’s appearance. Regardless of Soulster being viewed from front, back or side, it offers innovative perspectives derived from the original Soul.

With young buyers in mind, Kia Soulster offers an agile, smooth and spirited ride. As with its Soul cousin, Soulster’s can be made available with a myriad of engine choices depending upon each market’s needs. A 1.6-liter, four-cylinder engine is mated to a five-speed manual transmission, which produces approximately 120 horsepower. For those looking for a little more power, a 2.0-liter four-cylinder engine is available with either the five-speed manual or a four-speed automatic transmission, producing approximately 140 horsepower. Fuel economy for both engines is estimated at 30 or more miles per gallon. Other markets might choose the 1.6-liter four-cylinder engine producing 124 horsepower or a 1.6-liter turbodiesel.

Aston Martin DBS Volante makes its debut at the 2009 Geneva Auto Salon. Completing the Aston Martin DBS line-up, the new Volante will afford customers the combination of the DBS’s already-established benchmark sports car characteristics with all the thrills of open-air motoring.
Broadening the DBS’s character, the Aston Martin DBS Volante will appeal to drivers who wish to combine the excitement of driving a finely-tuned sports car with the invigorating feeling of being open to the elements. This juxtaposition of ultimate performance and openness stirs the senses on any drive whether an exhilarating jaunt on favoured roads or cruising on lengthy journeys. ‘Volante’, meaning ‘moving with light rapidity’, perfectly defines the performance potential and the dynamic characteristics of the Aston Martin DBS Volante.

Featuring a motorised retractable fabric roof, the DBS’s beautiful profile is preserved whether up or down. When the roof is closed, it provides a warm comfortable ambience and when open, it neatly disappears behind the new tonneau cover at the touch of a button.

Conceived as a Volante from the outset, Aston Martin engineers opted for a fabric hood to closely follow the silhouette of the DBS coupe and due to its lightweight properties, minimise overall weight gain. Fully retractable in only 14 seconds and at up to speeds of 30 mph (48 km/h), the roof will automatically stow under the newly sculpted tonneau, maintaining the Aston Martin DBS Volante’s perfect form – hood up or down.

Power is provided by Aston Martin’s hand-built all alloy 6.0-litre V12 engine producing 510 bhp (380 kW / 517 PS), and 570 Nm (420 lb ft) of torque with a top speed of 191 mph (307 km/h) and 0-62 mph (0-100 km/h) time of 4.3 seconds. The nature of the V12, and in particular the torque available at all engine speeds, serves to provide effortless driving in all situations.

Aston Martin’s 16th convertible in 95 years, the Aston Martin DBS Volante draws on the marque’s extensive experience in designing iconic ‘Volantes’ and is a 2+2 featuring two occasional rear seats, ideal for young people or extra luggage. In standard specification, the DBS has a rear-mounted six-speed manual gearbox, while an automatic six-speed ‘Touchtronic’ option is also available. As with the coupe, the Volante is offered with carbon ceramic brakes as standard providing exceptional stopping power. Benefitting from materials derived from the motorsport and aerospace industries, the bonnet, front wings and boot lid are made from carbon fibre all helping to reduce weight.

The Aston Martin DBS Volante also comes with Bang & Olufsen’s renowned ‘BeoSound DBS’ in-car entertainment system, featuring 13 speakers as standard equipment. The BeoSound DBS has been expertly tuned by Bang & Olufsen’s Tonmeisters and Aston Martin’s acoustic engineers specifically for the Volante resulting in a system that senses when the roof has been retracted and adjusts the sound stage to compensate for extra wind noise, providing an unrivalled automotive audio experience.

Although the DBS was originally conceived as a two-seater sports GT, the potential for a Volante version was always in the minds of the design team. Holding a purposeful stance, the muscular shapes and forms of the DBS have been retained exuding confidence.

Aston Martin’s 16th convertible, learning taken from the engineering of previous soft-top cars has resulted in the Aston Martin DBS Volante possessing Aston Martin’s quietest and most refined roof system to date. When raised, the fabric roof is insulated with a layer of Thinsulate® material relieving cabin noise and protecting the inhabitants from the elements. The hydraulic pump has been cocooned in a noise and vibration enclosure reducing noise when raising and lowering the hood.

The newly choreographed hood has resulted in an opening time of only 14 seconds due to a new five-piston hydraulic pump. The roof effortlessly stows below the newly-sculpted tonneau cover which has been redesigned to enhance the muscular attributes of the Aston Martin DBS Volante. Housing the Roll-Over-Protection-System (ROPS) which deploys two roll bars in the event of the car rolling over, the rear humps lead your eye to the new carbon fibre deck lid which has been re-styled for the Aston Martin DBS Volante. Particular to the DBS, a line flows from the leading edge of the bonnet past the elegantly sloped windscreen flowing into the carbon fibre deck lid and to the rear boot ‘flip’.

As with the DBS Coupe, the bonnet, front wings and boot lid are formed from carbon fibre. Preventing the weave protruding the paint finish, Aston Martin employs a patented ’surface veil’ technology applying a 200 micron thick layer of epoxy glue to the carbon fibre, before the application of seven layers of paint producing a class A level of finish.

The interior of the DBS represents the epitome of Aston Martin’s commitment to using materials honestly, without disguise or embellishment. Lightweight materials are used throughout to save weight; door pulls are made from carbon fibre, for example, and the carpet has been woven with lighter fibres to save valuable kilograms.

The Volante features 2+2 seating as standard. The beautifully leather trimmed rear seats are ideal for younger persons or extra luggage making the Aston Martin DBS Volante a practical everyday sports car.

Delivered as standard with Bang & Olufsen’s BeoSound DBS audio system and seamlessly integrated into the Aston Martin DBS Volante’s bespoke interior, the system provides the driver and passengers with an unrivalled audio experience. Consisting of 13 individual speakers and Bang & Olufsen’s unique Digital Signal Processing system, the system transforms the Aston Martin DBS Volante into an acoustically sophisticated venue, capable of conveying subtle and striking musical dynamics from every source. The BeoSound DBS has been specifically revised for the Aston Martin DBS Volante and senses when the roof is up or retracted and adjusts the sound stage to compensate for wind noise and change in acoustics.

The Bang & Olufsen BeoSound DBS system has been developed exclusively for Aston Martin. The system is acoustically and physically matched to the Aston Martin DBS Volante, with a design that follows the inherent quality and material honesty of the Aston Martin interior. The loudspeaker grilles are finished with smoothly contoured aluminium so as to integrate seamlessly with the fluid lines and curves of the cabin. When the system is turned on, the twin acoustic lens speakers emerge silently and swiftly, adding a touch of theatre and technological panache that is the perfect complement to the Aston Martin DBS Volante.

As with the coupe, the Volante affords customers the prospect of specifying the optional 10-spoke 20″ forged aluminium lightweight wheel with diamond-turned surface – available in either silver or graphite finishes. With an overall unsprung mass reduction of 8 kg, the option aids enhanced handling, improved acceleration, and braking performance.

The need for high-performance stability, handling ability and low kerb weight defined the DBS’s form and construction. The Aston Martin DBS Volante is powered by the same 6.0-litre V12 engine at the heart of the DBS which was launched in 2007. Producing 510 bhp (517 PS / 380 kW), peak power is delivered at 6500 rpm and the 570 Nm (420 lb ft) of torque is delivered at 5750 rpm. Tractable at any time, the DBS possesses a ‘flat’ torque curve providing 85% of the torque from 1500 rpm.

The 3.71:1 (manual) and 3.46:1 (Touchtronic) final drive ratio assures that all the Aston Martin DBS Volante’s power is useable, while also enhancing in-gear acceleration.

Adding to the sonorous V12 enhances the aural soundtrack. Special by-pass valves in the exhaust allow a quieter exhaust note at low speeds; at 4000 rpm these open to reduce the pressure in the exhaust system, raising the power output as well as generating a rousing aural accompaniment.

The Aston Martin DBS Volante is available as standard with a rear-mounted 6-speed manual gearbox with gear ratios optimised to extract the very best from the 6.0-litre engine. Providing customers with even greater personalisation capabilities, a ‘Touchtronic’ 6- speed automatic featuring a torque converter is also available as an option.

Derived from the same ZF transaxle unit that was developed for the Aston Martin DB9, the system has been substantially re-engineered to accommodate the power and performance characteristics of the DBS.

System functionality is consistent with that on the DB9, with ‘Park’, ‘Reverse’, ‘Neutral’ and ‘Drive’ modes selected via facia mounted controls.

When in ‘Drive’ mode, pulling either of the leather-trimmed magnesium alloy paddles mounted on the steering column will activate Touchtronic mode, enabling the driver to control gear shifts via the paddles. Touchtronic mode is also accessible directly on engine start-up. Alternatively, the ‘Drive’ mode can be selected at any time by pressing the ‘D’ control on the centre console, engaging a fully automatic mode which will select the most appropriate gear for the speed and driving conditions automatically.

The system also includes a ‘Sport’ mode – activated by a button on the centre console – which engages a more aggressive gear shift strategy as gear changes feel sharper and more forceful, engine speed matching on downshifts is more aggressive and in full automatic mode, upshifts occur at higher speeds. The Sport setting also incorporates a more responsive throttle map to match the high-performance characteristics of the Aston Martin DBS Volante.

Contributing to the class-leading levels of rigidity, the VH-platform (Vertical – Horizontal) upon which all Aston Martins are founded, ensures a dynamically accomplished convertible translating into an exciting and communicative chassis. The VH architecture is a bonded aluminium structure that provides outstanding strength and rigidity. In comparison to its coupe sibling, the Volante retains 75% of the rigidity equating to 20kNm per degree. This has been achieved by rigidly mounting the rear sub frame and optimising the front and rear shear panels. Working together these components contribute to more than 20% of the total torsional rigidity.

Augmenting the Aston Martin DBS Volante’s supreme handling characteristics is the near perfect weight distribution – achieved by mounting the 6-speed gearbox at the rear placing 85% of the weight between the front and rear axle.

To take full advantage of its extremely precise and rigid platform, the DBS employs a sophisticated Adaptive Damping System (ADS) which is specifically tuned for the Aston Martin DBS Volante maximising ride comfort. It uses two separate valves to set the dampers to five different positions, allowing instant adjustment of the car’s ride and handling characteristics. The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond instantly to different driving conditions. The dampers can be ’softer’, with a corresponding improvement in ride quality, or ‘firm’, providing improved body control for more spirited driving.

The damper settings are determined by an electronic control unit which takes sensor readings from the car’s systems, including throttle position, brake position, steering wheel rotation and vehicle speed. This data establishes the prevailing driving conditions and the demands the driver is making on the car.

The Aston Martin DBS Volante’s Adaptive Damping System perfectly captures the car’s sporting character, ensuring that stiffer dampers are available for better handling and control when the car is being driven enthusiastically, without compromising ride comfort during ‘normal’ driving conditions. A designated ‘Track’ mode automatically sets all dampers to their firmest positions, making it ideal for circuit driving. The DBS Volante is fitted with Pirelli P-Zero tyres that have been developed especially for the car.

The Aston Martin DBS Volante also has a revised Dynamic Stability Control (DSC) system specifically tuned to the Volante to help maintain maximum traction in challenging driving conditions. In default operation, the DSC is automatically on. Select and press the button for two seconds and DSC ‘Track’ mode is engaged, raising the threshold at which the system intervenes to allow the experienced driver to explore the car’s limits. Hold the button for four seconds and DSC is disengaged entirely.

Carbon Ceramic Matrix (CCM) brakes are featured as standard. Providing shorter stopping distances with excellent resistance to fade in even the most demanding driving conditions, the CCM brakes are some 12.5 kg lighter than a conventional system. This results in reducing the overall weight of the car and, in particular, the unsprung weight and rotational masses, further enhancing the Aston Martin DBS Volante’s dynamics.

Volkswagen of America, Inc. helped Mattel celebrate Barbie® doll’s 50th Birthday by transforming a New Beetle convertible into the ultimate Barbie® dream car. The life-size pink Malibu Barbie™ New Beetle convertible made its debut at Barbie® doll’s Malibu Dream House® exclusive birthday celebration. Customization artists ABD Racing Werks, Katzkin Leather and Interiors and FoamMolders fully transformed the iconic New Beetle convertible into the perfect Barbie® ride.
“We are extremely proud to partner with Mattel and create a customized New Beetle convertible to celebrate Barbie’s landmark birthday,” said Laura Soave, General Manager of Marketing, Volkswagen of America, Inc. “Like the New Beetle, Barbie has made a remarkable impact on pop culture history, and still remains a cultural icon today.”

From top to bottom and interior to exterior, Barbie® doll’s New Beetle convertible has left no detail unfinished. From the white custom leather interior and convertible top to the hand stitched floor mats and pink quilted leather lined door pockets and arm rests, even the dipstick is painted to resemble her favorite lipstick. The New Beetle convertible is equipped with a motorized vanity in the trunk and plenty of rhinestone accents and vanity mirrors. Over five shades of paint were mixed together to create the perfect pink color for Barbie® doll’s car.

The customized pink New Beetle convertible was prominently on display as the pink carpet was rolled out for the Barbie® celebration at her real-life Malibu Dream House®. Barbie® doll’s house is a 3,500-square-foot home in Malibu, CA, decorated by famed “Happy Chic” interior designer Jonathan Adler. The Barbie® birthday festivities were complete with 1,800 pairs of Barbie® sunglasses, 3,500 pairs of tiny shoes, 3,500 mini handbags and numerous Hollywood celebrity guests.

Last year, Volkswagen celebrated the 10th anniversary of the introduction of the New Beetle convertible. With its distinct shape, the iconic New Beetle convertible is one of the most recognized models in the world.

Maximum driving fun with minimal fuel consumption: This is the standard by which Volkswagen is starting the new car year 2009 and is presenting the roadster Concept BlueSport at the North American International Auto Show. “The BlueSport proves to be a compact and passionate car with a clear Volkswagen signature. The car offers pure dynamics with a powerful 180 PS Clean Diesel engine that is combined with the characteristic Volkswagen philosophy of efficiency,” confirmed Volkswagen’s Chairman of the Board, Prof. Martin Winterkorn in Detroit.

The Concept BlueSport is making its appearance at the car show in Detroit with a Flex Silver exterior and orange fabric convertible top. “It is the symbiosis of outstanding technology and timeless Volkswagen design that makes this car an exceptional sports car. Its styling is clear and is reduced to the essentials; the car body itself has a lean and linear structure”, explains Volkswagen chief designer Walter de Silva. The interior shows finesse in details and conveys a high level of technological fascination. Immediately visible to the eye is the intuitive and easy to operate touchscreen. Perfectly adapted to the interior are the leather upholstered seats in lightweight construction with their single-piece seatbacks.

Behind the two sport seats of the 3.99 meter long Concept BlueSport, a 132 kW / 180 PS strong Clean Diesel (TDI) with common rail injection and downstream NOx storage catalytic converter delivers dynamic performance. A 6-speed DSG dual clutch transmission – the most economical and agile transmission system in the world – transfers power to the rear wheels. In just 6.6 seconds the sports car is moving at 100 km/h; its top speed is 226 km/h. Also having a positive impact on the car’s low fuel consumption of just 4.3 l/100 km and reduced emissions are two technologies that are part of the so-called Eco mode: an automatic start-stop system and energy regeneration. Together they propel the Concept BlueSport to an additional fuel savings of up to 0.2 liter per 100 kilometers in city driving.

200EX is the latest experimental car from Rolls-Royce Motor Cars. It explores a design direction for a dynamic, modern, four-door Rolls-Royce engineered for the 21st century.

PHILOSOPHY

Experimental models have always played a significant role in the history of Rolls-Royce Motor Cars, from the first – 1EX, built in 1919 – to the most recent – 101EX, built in 2006. Unlike a concept car, the experimental models developed by Rolls-Royce Motor Cars have always been fully functioning vehicles, residing in a tangible world of wood, leather and metals rather than clay and foam. EX cars offer designers and engineers the opportunity for real-world innovation and have been used to showcase new components and engineering techniques as well as exterior and interior designs. “Modern automotive engineering is a balance of creativity, innovation and application. 200EX is an opportunity to assess these new ideas,” explains Helmut Riedl, Director of Engineering.

100EX was the first experimental car unveiled after Rolls-Royce Motor Cars was relaunched under BMW Group ownership in 2003. Revealed at the Geneva motor show in 2004, the two-door, four-seat convertible was built to mark 100 years of Rolls-Royce motor car design and engineering. Just two years later, 101EX was presented, which explored modern coupé design. Both of these cars inspired production models that not only closely resemble their EX progenitors but have also redefined luxury motoring in the modern age.

Following on from this success, the same group of designers and engineers has created 200EX, itself pointing the way to RR4, a new Rolls-Royce model scheduled for production in 2010. The brief for 200EX? To create a modern, lithe and dynamic Rolls-Royce that bears all the hallmarks of the great cars that have gone before it: effortless performance, unparalleled refinement, exquisite quality and confident design.

DESIGN

“Alluring, inviting, approachable – this car captivates with each encounter” – Chief Designer, Ian Cameron

200EX has a dynamic edge to its styling and is noticeably less formal than previous models. Its size, style and expression broaden the appeal of the car, making it more appropriate for a wider range of circumstances. “200EX is a touring saloon with more than a little panache and perhaps more bravado than one might have expected from Rolls-Royce Motor Cars,” says Cameron. “What you see is a modern car that is immediately recognisable as a true Rolls-Royce, even from angles that obscure the grille and Spirit of Ecstasy. Design elements such as the elevated prow, long bonnet, short front overhang, sharply raked A-pillar and elegant tail give 200EX an air of informal presence – powerful but unobtrusive.”

The exterior design is dominated by large, uninterrupted surfaces, while finely sculptured horizontal lines add definition and geometric precision. In combination, the upward-sweeping sill line and low-cut roof create a powerful profile. The tapered rear is enhanced by powerful shoulders and flanks that draw in sharply, narrowing as they flow from the rear wings to the tail-lights.

The rear-hinged coach doors give the car a natural presence and sense of theatre. Revived in 2003 on the Phantom, this signature feature lends added functionality and style to the design. Opening through a generous 83 degrees, the coach doors offer the widest rear access in the car industry as well as providing the warmest of welcomes to those about to step inside.

At the front, a pair of LED headlamps flank the latest evolution of the world’s most famous grille. “We wanted this to be less reminiscent of the traditional ‘Parthenon’ style and more like a jet intake,” says Ian Cameron. The sides of the intake have been curved inwards and the vanes set back into the opening. It’s a more dynamic form that moves on from the design first seen on the Phantom Drophead Coupé.

The exterior of 200EX is finished in Darkest Tungsten, which contrasts with the silver satin finish applied to the bonnet and A-pillar. Seven-spoke, 20-inch wheels complete the visual impact of the exterior.

Within 200EX, Interior Designer Alan Sheppard has accomplished a contemporary atmosphere, incorporating the Rolls-Royce Motor Cars principles of fine materials and peerless comfort. The space is filled with natural light, which brings in a real sense of the outside world. However, substantial doors and a high shoulder line ensure that occupants feel cosseted and protected. In the rear, the intimate ambience of the lounge seat is emphasised by its position behind the C-pillar, heightening the sense of privacy.

Naturally, the finest materials have been used. Elegant, frosted lamps and chrome door handles feature, while details include traditional violin key switches, eyeball air vents, opaque dials and refined instrumentation.

“As with any Rolls-Royce, detail is crucial,” says Alan Sheppard. “We want the lasting impression for owners to be that their car was made just for them by someone skilled and caring.”

The dashboard has been kept deliberately clear; it is spacious
in its design and has an intuitive layout. The controls are neatly sculptured, with more important functions emphasised by accents of chrome. The soft light of the instrument panel glows through the familiar black-rimmed steering wheel, which itself incorporates a number of violin keys as well as an ergonomic roller-ball control.

The interior of 200EX is finished in supple, natural grain Crème Light leather, with Cornsilk carpets and cashmere blend headliner. The featured wood veneer is Santos Palissander, chosen for its contemporary look and striking grain.

“200EX is a modern execution of timeless Rolls-Royce elegance, breaking with some areas of tradition but retaining the core values that make our marque unique,” says Chief Executive Officer Tom Purves. “We expect the more informal, agile design to broaden the appeal of Rolls-Royce Motor Cars, attracting people who appreciate its fusion of refinement, new technology and contemporary style.”

200EX TECHNICAL SPECIFICATION

No. of doors/seats: 4/5
Vehicle length: 5399mm
Vehicle width 1948mm
Vehicle height: 1550mm
Wheelbase: 3295mm
Engine: new V12
Wheel and tyre size: 20 inch, 255/45 R 20 front and 285/40 R 20 rear

The 2009 G37 Convertible will be inspired by the 2008 Coupe version; this means it will combine the same exhilarating performance, stunning styling and modern, sporty interior of the original Infiniti G Coupe.

Under the hood of the Convertible version we will see a 3.7 liter V6 engine with an output of 330 hp and a peak torque of 269 lbs-ft. The engine will be matted with a a choice of an upgraded electronically controlled 5-speed automatic transmission with manual mode, downshift rev matching, DS mode and ASC (Adaptive Shift Control) that allows for quicker shifts in sporty driving situations and available genuine magnesium paddle shifters; or a newly revised, lightweight 6-speed manual transmission.

The G37 Convertible will be build on the FM (Front Mid-ship) platform, which has been stiffened 36% from the previous generation, is lower in overall height and has a wider front and rear track width.

Also there are rumors that Infiniti is working on a more powerful version of the G37: an all-wheel drive, twin-turbocharged version that will have an output of 500 hp. This mean that the 2009 G37 will be even more powerful like a GT-R. So, it will reach at least a top speed of 185 mph and the 0 to 60 mph sprint will be made in less than 4 seconds.

Like the Coupe, the Convertible version will be offered in three different versions: standard, Journey and Sport. The most powerful, and of course the most expensive will be the the Sport version. It will feature 19″ wheels, Viscous Limited-Slip Differential (VLSD), sport-tuned suspension, sport brakes, unique front fascia and side sills, sport-styled seats and steering wheel stitching.

—-

History

Nissan 300ZX Convertible

Nissan unveiled the 300ZX or the Fairlady Z in 1983. It stayed into production until 2000 and was build with two different: the Z31 and the Z32 (same used in the Z-series).

The Z31 chassis was designed after the previous Z-car, the Nissan 280ZX, but it was featuring a new, more aerodynamic body than the previous 280ZX.

It was powered by either a naturally-aspirated or a turbocharged V6 producing 160 hp and 200 hp respectively.

In 1986 Nissan added side skirts and replaced the fiberglass spoiler with a durable plastic one; the 300ZX was given a much sleeker look when the hood scoop was removed. A third brake-light was also added to the interior of the unit for safety.

The convertible version was available only in the Z32 series. It was unveiled in 1993 and lasted until the end of the 300ZX. It was powered by a 3.0-liter V6 that produced 222 hp 6400 rpm and 198 pound-feet of torque 4800 rpm. Power was applied to the rear wheels through a standard five-speed transmission and limited-slip differential. A four-speed automatic was optional.

300ZX was also available in Turbo version. It was powered by a modified version of the V6 engine. Thanks to intercooling and a single turbo for each cylinder bank, it produced 300 hp and 280 lb-ft of torque.

Maybe the most aggressive customized Lexus IS 350C to be presented at SEMA Show comes from 0-60 Magazine and Design Craft Fabrication. Painted in white, the 0-60 Magazine’s IS Coupe features a new Greedy Performance exhaust system, engine management computer and gauges.

Its sporty appearance is being accentuated by acing wheels with Continental Performance tires, Brembo brakes with custom front and rear Big Brake kit and KW coilover suspension system.

This isn’t your average IS Convertible. It’s 0-60 Magazine’s IS Coupe, a more aggressive, performance-enhanced luxury two-door.

Highlights

• Greedy Performance exhaust system, engine management computer and gauges
• Advan Racing Lightweight one piece racing wheels with Continental Performance tires
• Brembo Brakes with custom front and rear Big Brake kit (rotors and calipers)
• KW coilover suspension system
• Ings+1 exterior body kit